AUDI2012
A2OC Donor
Hi all,
Recently had my rear suspension done with my local indie and the list was very helpful in making things easier. Thought I’d post parts used and parts that have been superseded which have an S at the beginning.
I stuck to OE springs from Audi/TPS and used Monroe shocks on my SE which, as mentioned above have changed from E1308 to SP376036 (Monroe OESpectrums)
Parts used for rear:
Springs OE x2 = 8Z0511115BA
Pipes x2 = 1J0513425A
Spring upper seats/underlay x2 = 1J0512149B
Lower seats/underlay x2 = 8Z0511149A
Bumper stops/buffer x2 = 6Q0512131B
Hexagon Bolts x2 (goes thru shock) = SN90517304
Nuts x2 (tightens the above) = N10286110
Bolts for shock absorber mounts x4 = N90648402
Shock Absorber mounts x2 = 1J0513353D
Top Protective Cap x2 (sits on mount) = S1J0512135A
Bolts for shocks = SN10403702 (not required if comes on shock)
Parts & labour all in under £500, can’t complain!??
I had the rattle/knocking at the back which was due to the mount having play but now its gone and the ride is much more softer/cushiony.
Nice1.
Recently had my rear suspension done with my local indie and the list was very helpful in making things easier. Thought I’d post parts used and parts that have been superseded which have an S at the beginning.
I stuck to OE springs from Audi/TPS and used Monroe shocks on my SE which, as mentioned above have changed from E1308 to SP376036 (Monroe OESpectrums)
2 X ORIGINAL MONROE REAR SHOCK ABSORBER FOR AUDI A2 SEAT IBIZA SKODA VW 376036SP | eBay
MPN - 376036SP. SEAT IBIZA Mk IV (6L1) | AUDI A2 (8Z0) 1.4 1.6. SKODA FABIA I (6Y2) (6Y3) (6Y5) - II (542) (545) |. SHOCK ABSORBER. SHOCK ABSORBER SYSTEM - TWIN-TUBE. SHOCK ABSORBER TYPE - GAS PRESSURE.
www.ebay.co.uk
Parts used for rear:
Springs OE x2 = 8Z0511115BA
Pipes x2 = 1J0513425A
Spring upper seats/underlay x2 = 1J0512149B
Lower seats/underlay x2 = 8Z0511149A
Bumper stops/buffer x2 = 6Q0512131B
Hexagon Bolts x2 (goes thru shock) = SN90517304
Nuts x2 (tightens the above) = N10286110
Bolts for shock absorber mounts x4 = N90648402
Shock Absorber mounts x2 = 1J0513353D
Top Protective Cap x2 (sits on mount) = S1J0512135A
Bolts for shocks = SN10403702 (not required if comes on shock)
Parts & labour all in under £500, can’t complain!??
I had the rattle/knocking at the back which was due to the mount having play but now its gone and the ride is much more softer/cushiony.
Nice1.
Last edited: