Evening David,
I can confirm it’s a T6 you’re after. I’ve just removed my Double DIN Soul Soft Touch panel to repaint with Lidl Matt Black to get a better match to the A4 Hard Touch buttons.
Once the front panel is off (6x T6) you’ll be presented with the green circuit board. No need to attempt to remove the ribbon cable, just remove the next 5x T6 screws and the circuit board with come away from the front fascia.
All you will have left is the front fascia with the buttons in. As stated above, use something like a sharpened eraser on the end of a pencil and they will simply pop out. The groups of 3 buttons both left and right don’t come out as easily as the bigger buttons surrounding the digital display area.
Below is a picture of the panel I have disassembled, removed the soft touch paint and sanded with 1200 grit wet and dry. Ready for preparation and painting tomorrow evening.
View attachment 54870
View attachment 54871
From these images you should be able to work out where to push from.
Kind regards,
Tom