Now you've got the old one out swap the pull cable over to the new catch and remove locking plug (from new handle) Then build up in reverse

Now you've got the old one out swap the pull cable over to the new catch and remove locking plug (from new handle) Then build up in reverse

  • 0
  • 0
Now remove the cable from the door handle

Now remove the cable from the door handle

  • 0
  • 0
This is the view looking in after the end cover has been removed you can see the screw full screwed in (top right)

This is the view looking in after the end cover has been removed you can see the screw full screwed in (top right)

  • 0
  • 0
Remove plastic cover to reveal a T20 screw, screw this in to remove rear part of the door handle (screw it all the way in) you will see it moving on t

Remove plastic cover to reveal a T20 screw, screw this in to remove rear part of the door handle (screw it all the way in) you will see it moving on t

  • 0
  • 0
Remove the weather cover to reveal the catch

Remove the weather cover to reveal the catch

  • 0
  • 0
The door catch screw 2 of these spline drive number 8 (S8 or Multi torx 8) which ever you profer to say, on the srew head it has got a number 8

The door catch screw 2 of these spline drive number 8 (S8 or Multi torx 8) which ever you profer to say, on the srew head it has got a number 8

  • 0
  • 0
Door with window and frame removed (on the rear door i found the outer weather strip has to come off that just pulls up to remove (again don't pull to

Door with window and frame removed (on the rear door i found the outer weather strip has to come off that just pulls up to remove (again don't pull to

  • 0
  • 0
Remove the clip holding the loom from the window channel

Remove the clip holding the loom from the window channel

  • 0
  • 0
Remove the outer door rubber seal (try not to pull to hard as you can stretch this making it harder to put back on) When putting back on you find i

Remove the outer door rubber seal (try not to pull to hard as you can stretch this making it harder to put back on) When putting back on you find i

  • 0
  • 0
Front top screw Again behind the rubber (shown with the rubber removed

Front top screw Again behind the rubber (shown with the rubber removed

  • 0
  • 0
Upper rear screw found behind the rubber

Upper rear screw found behind the rubber

  • 0
  • 0
Window channel (rear lower screw) T45

Window channel (rear lower screw) T45

  • 0
  • 0
The window channel (2 screws on this side one at the top (1 from the out side) and 1 at the bottom) T45

The window channel (2 screws on this side one at the top (1 from the out side) and 1 at the bottom) T45

  • 0
  • 0
After the inner panel has been removed

After the inner panel has been removed

  • 0
  • 0
The inner panel (after the door cards removed)

The inner panel (after the door cards removed)

  • 0
  • 0
Screw behind window winder (push this up to reveal the screw)

Screw behind window winder (push this up to reveal the screw)

  • 0
  • 0
2nd screw under pull handle

2nd screw under pull handle

  • 0
  • 0
Screw under pull handle

Screw under pull handle

  • 0
  • 0
Screw behind tweeter grill

Screw behind tweeter grill

  • 0
  • 0
T

Rear Door Micro switch change

Photo's on how to change rear door micro switch
Click to expand...
There are no comments to display.

Album information

Album owner
the grim reeper
Date created
Item count
19
View count
1,968
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

T

the grim reeper

Media items
57
Albums
2
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top