OK here we go,
Fans will not come on. I read the wiring diagrams and the inhibit signals go through the ECU and the HVAC module.
1. The engine output tests will not turn on the fans at all.
2. I cannot connect to the HVAC module, too many comms errors.
3. I get 12v at the thick cable going into the module and ground connections are pretty good.
4. Ohm readings when cold indicate that the motor winding is 50 Ohms or thereabout.
I read too many posts about people having fixed theirs but no mention as to how. Or the threads are finished without any conclusion.
Any clues?
Regards,
Evros
Fans will not come on. I read the wiring diagrams and the inhibit signals go through the ECU and the HVAC module.
1. The engine output tests will not turn on the fans at all.
2. I cannot connect to the HVAC module, too many comms errors.
3. I get 12v at the thick cable going into the module and ground connections are pretty good.
4. Ohm readings when cold indicate that the motor winding is 50 Ohms or thereabout.
I read too many posts about people having fixed theirs but no mention as to how. Or the threads are finished without any conclusion.
Any clues?
Regards,
Evros