A2 wiring diagram wanted

rkeil

Member
Hello, i need a copy of the A2 wiring diagram, can any one help?


My brake pad sensor has been ripped off in recent heavy rain so my warning light in remains on. i need to know if i can dead short it to turn warning light off? does the sensor run from a positive or negative return?
 
I wouldn't 'dead short' anything, this can have an effect on other circuits for ecu input calculations, ABS etc

I will have a look for relevant diagrams for you, what spec is your car?

Cheers

Sarge
 
Last edited by a moderator:
Isn't the brake pad sensor a pair of wires on the passenger side front pad (for UK spec) which is a closed circuit when normal? If so, your warning is on could be because the connector is disconnected or the pads are worn down. Not entirely sure it has something to do with heavy rain... I could be wrong though.
 
thanks hump but the part in question has been torn from the front calliper while driving in the heavy rain so i am left with two bits of wire, both too short to join together
 
hi Sarge, thanks fro the kind offer, no not touching anything until i see a diagram...
i have a 2001 1.4tdi
 
Hello, if found this in the ECU compartment --the plug in fried, two wires totally broken.Where does this goes? Can you help me with a wiring diagram? Thanks
 

Attachments

  • plug1.jpeg
    plug1.jpeg
    373.2 KB · Views: 703
  • plug3.jpeg
    plug3.jpeg
    495 KB · Views: 730
Sarge,
You are a hero of the first magnitude! What a job and what a great result. Well done!
I’m about to attempt an a/c retrofit which will hopefully be a walk in the park compared to your project.
 
Back
Top