Bespoke A2 Footrest Group Order

Status
Not open for further replies.
Proghound said:
Hi Tom, @Bargepower very kindly offered to collect mine plus any surplus for the Shop, along with his own. I will also go my own route with the 3M tape on mine, so please could I just take the bare product?

Similarly, please could the Shop take any surplus as bare product, but the Shop will purchase the remainder of the 3M roll(s), which I will apply at point of sale. Please also let me know by PM what the balance will be for the Shop (if any).
Many thanks,
Ian.
Click to expand...
Ian,

Your delivery cost will be removed and updated later on sir. Out and about at the minute. All will be in order before I request payment.

Kind regards,

Tom
 
Last edited:
Evening Mark,

You will be added to the list now and will be shown on the above list later on or tomorrow morning.

Kind regards


Tom
 
depronman said:
Tom, just a thought would cut-tec make a few more at the same price so that the shop could take a few, say 12

Paul
Click to expand...
Paul,

It is a question that I will ask sir.

For anyone else wishing to join in on this group order please do continue to register your interest as Im certain that Cutting Technologies won't turn down an order greater than 93 units. Although I have constantly mentioned that the limit is 93, this is the minimum order to obtain the footrests at the better price. The price wouldn't decrease until we hit the next milestone of 179 footrests.

Ian @Proghound can you give me a total that you will happy to take into the shop and I will ask the question.

Now who is going to take the final one to secure the price per unit of £3.91 including VAT, postage additional though.

Kind regards,

Tom
 
Updated list due to requests to omit the 3M tape option, this can be taken by anyone. The 3M tape is not mandatory, just a thought for my to purchase it to save you buying a whole roll of it and having over 4m spare. once again, this group order is not for personal profit, I too will be paying full price for my 3 footrests:
Screen Shot 2020-09-24 at 22.14.16.png

Screen Shot 2020-09-24 at 22.14.31.png

I must add though, a cost of £0.10 per footrest will be added to your total to offset the cost of Paul's free footrest (the work done in the background on the CAD File), my time on this venture, you can have for free.

Kind regards,

Tom
 
Redant said:
il take one please Tom ?
Click to expand...
You sir have just secured #93 and ensured that we can indeed have these at the great price if £3.91 (undelivered of course).

For everyone reading this... This really is great news everyone as this thread hasn’t been going that long and all 93 are now spoken for. Truly amazing, thank you all so much for your support. I in turn will supply you all with what you have shown interest in. The PMs will start tomorrow, after I have taken a picture or 2 of my new Votex style Spoiler for the Project OEM thread.

This is certainly not the end though. Please do keep showing your interest as I’m confident that Cut-Tec won’t say no to supplying us with plenty more at this price.

Kind regards,

Tom
 
johnyfartbox said:
It's really appreciated Tom, thanks for your time and effort.
Well done that man.
Click to expand...
johnyfartbox said:
Again, thank you Tom
Click to expand...
No problem at all.

This did start as an optimistic idea after I was let down by an auction site seller a couple of weeks ago.

I still cannot believe that in such a short time the great members of this fantastic forum have stepped forward and supported me in this venture.

All those who have registered interest will be fitting their new Bespoke Footrest in the coming weeks. I knew that I would have one fitted sooner or later but never thought that I would be able to have one adhered to my A2 for 2.5 times cheaper than I paid for the used lost eBay item.

I thank you all for helping me get what I was after. I’m certain that you will not with disappointed when yours arrives early October.

Kind regards,

Tom
 
2work said:
You sir have just secured #93 and ensured that we can indeed have these at the great price if £3.91 (undelivered of course).

For everyone reading this... This really is great news everyone as this thread hasn’t been going that long and all 93 are now spoken for. Truly amazing, thank you all so much for your support. I in turn will supply you all with what you have shown interest in. The PMs will start tomorrow, after I have taken a picture or 2 of my new Votex style Spoiler for the Project OEM thread.

This is certainly not the end though. Please do keep showing your interest as I’m confident that Cut-Tec won’t say no to supplying us with plenty more at this price.

Kind regards,

Tom
Click to expand...
Great news and great work Tom now if you could just sort out a vaccine by the end of next week put me down for one delivered.?
 
Redant said:
Great news and great work Tom now if you could just sort out a vaccine by the end of next week put me down for one delivered.
Click to expand...

Lol and Boris will be wanting to buy about 70million so you can certainly get the volume discount


Sent from my iPhone using Tapatalk
 
2work said:
Ian @Proghound can you give me a total that you will happy to take into the shop and I will ask the question.
Click to expand...
With everyone who wants one having ordered in this batch, Shop sales would likely only come from new members, or maybe existing members wanting another one for a newly acquired A2. I'd suggest an initial stock of 20 which is a decent trial size, but isn't too much for the float I'd be buying them out of.
 
Proghound said:
With everyone who wants one having ordered in this batch, Shop sales would likely only come from new members, or maybe existing members wanting another one for a newly acquired A2. I'd suggest an initial stock of 20 which is a decent trial size, but isn't too much for the float I'd be buying them out of.
Click to expand...
Understood Ian,

I will ask the question, I’m sure the reply will be positive.

Kind regards,

Tom
 
Afternoon everyone,

I’ve simply not had the time today to start transmitting the PMs to you all requesting payment.

With family commitments all weekend I doubt you’ll receive said PM until Sunday evening. Not need to rush to pay, just as long as I have received the payment on or before the 1st of October then the order with be submitted on time.

Kind regards,

Tom
 
No need to send individual personalised messages Tom. It may be easier to create a generic one and cut and paste into each PM you send to save time and effort. Sorry if this is your plan....just trying to help.?
 
Last edited:
Special edition said:
No need to send individual personalised messages Tom. It may be easier to create a generic one and cut and paste into each PM you send to save time and effort. Sorry if this is your plan....just trying to help.?
Click to expand...
Morning Dave,

I will of course create a generic message then just update the individual costs., your help and input is always appriciated though sir.

For everyone else reading this, I will start sending PMs later this morning and into the afternoon. All should be done so I can chill out later this afternoon and watch MotoGP!

I am yet to receive a reply from Cut-Tec regards an additional 20 footrests but I cannot see why they would say no.

Kind regards,

Tom
 
Tom, bear in mind that the odd quantities quoted are most likely what can be cut from a typical 8 x 4ft sheet of material. Thats why the quantity dropped when the footrest dimensions increased slightly. Any additions may bear a hefty premium.

Sent from my SM-N960F using Tapatalk
 
Status
Not open for further replies.
Back
Top