Bespoke A2 Footrest Group Order

Status
Not open for further replies.
Ref the cutout I would go with A2. Not everyone will want the club logo on the car. So A2 will be an attractive option to any A2 owner wanting a wee lift to the interior trim. Only my view.
Murdo,

Thank you for your input, my thoughts are the same but Grahams question needed to be raised.

Graham @audifan does this change your interest in anyway sir?

Kind regards,

Tom
 
I have modified the CAD file to make it slightly wider and longer
I have also produced another CAD file with A2OC text but have just realised that it will need modifying if the A2OC one is chosen because at the moment the centre of the O will fall out when cut
It will need a mod similar to the A to retain all the parts of the letter
For me this is another reason to stick with just A2 but it no problem to correct the CAD file if the majority want A2OC
I can’t laser cut a card sample now because the size is larger than will fit on my laser cutter but I have sent Tom a couple of jpg pictures of the file from my CAD software
Cheers. All

Paul


Sent from my iPhone using Tapatalk
 
Hi. Can you put me down for two please!
Post to mainland UK

Cheers
Wedge
Morning Wedge,

You will be added to the list this evening. Thank you so much for your interest. Your footrest might well be fitted very early in October.

Kind regards,

Tom
 
Morning Tom,

Can you put me down on your list for one please (Paul Roberts).

Thanks Paul
Morning Paul,

You too will be added to the list this evening.

Updated spreadsheet available when I get back to my laptop later on.

Kind regards,

To
 
I have modified the CAD file to make it slightly wider and longer
I have also produced another CAD file with A2OC text but have just realised that it will need modifying if the A2OC one is chosen because at the moment the centre of the O will fall out when cut
It will need a mod similar to the A to retain all the parts of the letter
For me this is another reason to stick with just A2 but it no problem to correct the CAD file if the majority want A2OC
I can’t laser cut a card sample now because the size is larger than will fit on my laser cutter but I have sent Tom a couple of jpg pictures of the file from my CAD software
Cheers. All

Paul


Sent from my iPhone using Tapatalk
Paul,

Thank you for your time on this project. I have seen the 2 images and will get them uploaded onto this thread later this evening.

I must say, they do look great what ever option we go for. Thanks again for your effort on this as you have been great and very timely with amendments.

Kind regards,

Tom
 
I can live with either A2 or A2OC. I don't see it as a deal breaker as few people will see it, tucked away in the footwell. It's not like the group number plate holders where it's a great opportunity to advertise the group.
 
Afternoon again,

I’ve just had confirmation from Cut-Tec of the costs. This is just an initial guess as it could fluctuate a little once they get the CAD file to for use as the template.

For now (and I don’t see this changing by much), the price seems absolutely brilliant and can be even better if there were over 100 members after one of these.

Here’s the break down of the prices straight from the PDF I have received.

The minimum order is £150 so here goes:

£150.80 = 29 footrests @ £5.20 each
£300.15 = 115 footrests @ £2.61 each
£499.10 = 230 footrests @ £2.17 each

All the above prices are delivered to me here in Leicestershire. Onwards distribution would of course incur addiction cost for postage and packaging.

I’m pretty certain that I could quickly sell 29 @ £5.20 (plus p&p) each as this is a very nice price indeed. I’m not sure I would like to put up £300 myself though, although this would absolutely be the best option as the price per unit is pretty much halved.

If I can generate 114 interested members then I will go for the £300.15 option. I would have to receive funds first as I’d not like to be down £300 should no one pay up for what they have shown interest in.

You’ll notice that in the above paragraph I state 114 units opposed to the 115 mentioned earlier, that’s because the cost of Paul @depronman to produce the CAD file will be a free footrest. The £2.61 for Paul’s footrest with be split over the remaining 114 items. I know it’s only a small cost and I’m sure it would be a lot most expensive to get someone else to produce said file. I’m just trying to totally honest and clear here as this little venture is not for personal profit, it too will be paying for my own footrest.

In the background I’ll be working with Paul to get the design (from your input)/CAD file perfected which will be available for you all to see here within this thread.

If this generates enough interest, say over 50 items, but not quite the 114 required then I will seek assistance from our amazing Admin Team to see if they could help out with the group order and put what’s not spoken for into the Club Shop Area.

I am so excited about this as it only started a few hours ago. You can see from the document/picture at the bottom that once Cut-Tec have the file and money the footrests will be with me in a week, that’s just amazing.

Similar to the Club Number Plate Surrounds thread a few years ago, I will add names of interested members to a spreadsheet as and when they are added to this thread, the spreadsheet will be displayed every time it is updated.

Over to you all again for any thoughts on design and of course show your interest. Please do not PM me to show your interest, keep it within this thread so everything is transparent and my inbox isn’t clogged like another Toms probably is.

To show you interest, simply reply to this thread stating how many footrests you want and whether you want it delivered or you’ll be collecting

Example:

2work 2x footrests delivered to mainland UK

2Work 2x footrests delivered to NON mainland UK

2Work 2x footrests collected from Coalville

Please do state if you’re address is mainland UK or not and when the time comes I’ll get a quote for postage to you. Can I ask that no one adds their address to this thread. When the time comes I will PM you all individually to get this information so I’m ready to dispatch the footrests soon as they arrive. Within the PM asking for your address I will supply my PayPal address for you to pay via PayPal Friends and Family.

That’s all I have for now. Here is the picture as I don’t know how to get the PDF Document on here:

View attachment 69717

Kind regards,


Tom
Hi 2work,
Could you put me down for 4 please.
Thanks
Keith.
 
Hi. Can you put me down for two please!
Post to mainland UK

Cheers
Wedge
Morning Tom,

Can you put me down on your list for one please (Paul Roberts).

Thanks Paul
One for me please. Posted to Mainland.

I also vote for A2. Less finicky to clean

Sent from my iPhone using Tapatalk
Can you put me down for one please Tom and thankyou once again.
Hi 2work,
Could you put me down for 4 please.
Thanks
Keith.

Evening all,

Been a long day but you have finally been added to the list.

Updated list along with pictures of the new template which will be transmitted to Ash at Cut-Tec will be added in minutes.

Thank you so much for your support and interest in this little project.

Kind regards,

Tom
 
Evening again,

Below are the picture that Paul @depronman has supplied for us to review.

Image 1. As originally proposed is the A2 cut out:

Audi A2 RHD Foot Rest T2 X L312 X W61 Ally V4.jpg

Image 2. Possibly option of having the Club Logo cut out. Note that the 'O' will require modifying so the inner circle isn't lost.
Audi A2OC RHD Foot Rest T2 X L312 X W61 Ally V4.jpg


The final decision is yet to be made on whether we go for 'A2OC' or 'A2" cut into the footrests. I have my personal opinion but this is a group order so your collective opinion really does count. I will order what the majority go for so please do speak up good people.

Kind regards,

Tom
 
Evening again,

Below are the picture that Paul @depronman has supplied for us to review.

Image 1. As originally proposed is the A2 cut out:

View attachment 69956
Image 2. Possibly option of having the Club Logo cut out. Note that the 'O' will require modifying so the inner circle isn't lost.
View attachment 69957

The final decision is yet to be made on whether we go for 'A2OC' or 'A2" cut into the footrests. I have my personal opinion but this is a group order so your collective opinion really does count. I will order what the majority go for so please do speak up good people.

Kind regards,

Tom
A2 here please
 
Status
Not open for further replies.
Back
Top