Bumper and Headlight alignment.

What do you think caused this? The headlight and bumper is out of alignment?

Accident repair? Headlight replacement? Large kerb or speed bump?

Is it easy to fix?
 

Attachments

  • 39CD84D0-5352-47D5-9457-249B96108BD4.jpeg
    39CD84D0-5352-47D5-9457-249B96108BD4.jpeg
    647.9 KB · Views: 171
Are there any creases or dents on the bumper cover? Does the bonnet fit and lock easily?Are the little plastic rivets still in along the upper edge of the bumper? The bumper may have been pushed back, the "spare" material now bulging away from the light producing the gap.
 
Are there any creases or dents on the bumper cover? Does the bonnet fit and lock easily?Are the little plastic rivets still in along the upper edge of the bumper? The bumper may have been pushed back, the "spare" material now bulging away from the light producing the gap.
So now there is a gap on the other side too… will take it in to bodywork guy and get his opinion.
 
Identical to me, I have small crease if i look on the front face of the bumper where a prang pushed the bumper in and our to side, there's a discernable line where behind the bumper is the crash bar thing. If you remove the light you may see creases behind bumper, in my case it was a lots heated and repaired plastic to push bumper back out.
 
This bit on the bonnet also appears to be broken… ☹️
 

Attachments

  • E68298C0-7341-4FE4-AD3E-7F0D92CA97F0.jpeg
    E68298C0-7341-4FE4-AD3E-7F0D92CA97F0.jpeg
    898.9 KB · Views: 126
Certainly replace the locator on the bonnet as soon as possible. Also check the corresponding location in the engine bay for damage.
 
Back
Top