Factory PDC Module Pin Out

2work

Well Known Member
United-Kingdom
Afternoon everyone,

Please Help!

You’ll probably have noticed I’ve been taking the functionality of the RNS-E PU 193G Revision to a new level.

I now want to see what is possible to have the rear bumper sensor display when I select reverse. this may only be solved with a CAN Gateway but I’m investigating possible solutions.

Stuart (RNSE PCBBC) is looking to help to see if he can add the specific CAN messages to the Arduino Unit I have installed to trick the CAN. To help him out has anyone got Pin Out diagram for the factory 8Z0 PDC Control Module. I’m guessing it is simple as switched feed, earth, reverse positive feed, CAN Hi and Lo. Please do help with a Pin Out diagram.

This will be a massive help and thank you in advance.

Kind regards,

Ton
 
Afternoon everyone,

Please Help!

You’ll probably have noticed I’ve been taking the functionality of the RNS-E PU 193G Revision to a new level.

I now want to see what is possible to have the rear bumper sensor display when I select reverse. this may only be solved with a CAN Gateway but I’m investigating possible solutions.

Stuart (RNSE PCBBC) is looking to help to see if he can add the specific CAN messages to the Arduino Unit I have installed to trick the CAN. To help him out has anyone got Pin Out diagram for the factory 8Z0 PDC Control Module. I’m guessing it is simple as switched feed, earth, reverse positive feed, CAN Hi and Lo. Please do help with a Pin Out diagram.

This will be a massive help and thank you in advance.

Kind regards,

Ton
Hi Tom,

PM me your email address I think I can help.

Andy

Edit. No need for email address I have just remembered I have it.
 
Last edited:
Afternoon everyone,

Please Help!

You’ll probably have noticed I’ve been taking the functionality of the RNS-E PU 193G Revision to a new level.

I now want to see what is possible to have the rear bumper sensor display when I select reverse. this may only be solved with a CAN Gateway but I’m investigating possible solutions.

Stuart (RNSE PCBBC) is looking to help to see if he can add the specific CAN messages to the Arduino Unit I have installed to trick the CAN. To help him out has anyone got Pin Out diagram for the factory 8Z0 PDC Control Module. I’m guessing it is simple as switched feed, earth, reverse positive feed, CAN Hi and Lo. Please do help with a Pin Out diagram.

This will be a massive help and thank you in advance.

Kind regards,

Ton

Have you checked ELSA?


Sent from my iPhone using Tapatalk
 
Hi Tom,

PM me your email address I think I can help.

Andy

Edit. No need for email address I have just remembered I have it.
Thank you Andy,

Just seen the email sir. This will most certainly help. Thank you very much.

Kind regards,

Ton
 
Last edited:
Have you checked ELSA?


Sent from my iPhone using Tapatalk
Hi Edward,

I’ve not got ELSA anymore unfortunately. Laptop crash.

I’ll look to rebuild the laptop and reinstall it at some point though.

Kind regards,

Tom
 
Email sent - Andy
Andy,

Thank you so much. Email is very informative. I’ll report back in a week or 2 with my finding on the OEM thread. Hopefully I can overcome the hurdle of not purchasing a CAN Gateway but it might be the only option.

Thank you so much again.

Kind regards,

Tom
 
Hi Edward,

I’ve not got ELSA anymore unfortunately. Laptop crash.

I’ll look to rebuild the laptop and reinstall it at some point though.

Kind regards,

Tom

Let me know if you still need it and I can get the page from ELSA for you


Sent from my iPhone using Tapatalk
 
Let me know if you still need it and I can get the page from ELSA for you


Sent from my iPhone using Tapatalk
Thank you Edward,

I now have what I need to do more investigation. Hopefully I will understand what I can do to get the RNS-E to change the page to the rear bumper sensor page when selecting reverse soon. I know it’ll need a coding/FW tweak along with getting the CAN messages from the Powertrain Bus to the Infotainment Bus. I’m hoping to work out what can be done without spending too much.

I do think someone on here done this some years ago with a CAN Gateway which wasn’t a cheap thing to do. I’m hoping that someone, somewhere has produced a similar item at a better price.

I’ll of course share all my findings on the OEM thread if I manage to achieve what I have in mind.

Thanks again.

Kind regards,

Tom
 
Not sure if the info will read over but craigyb old threads on a reversing camera installation may be of interest

Cheers Spike
 
Morning Spike,

Yes it was these posts threads that I was alluding too in the post above, I stumbled across them a years ago and could find them recently when I needed them.

I’ll re-read through these again as I’m sure it was craigyb who had the CAN Gateway installed.

Thanks again Spike.

Kind regards,

Tom
 
Back
Top