GRJ and tower diags

I didn’t use the part from the jdd box that the cables connect to. The cable ends are rather different on the jdd cables than the A2 cables
So I used all the A2 parts that the cables attached too and as such the A2 quadrant that bolts to the top of the tower
The jdd quadrant is quite different to the A2 quadrant so not sure how you would get the two to work together or even why you try when all the A2 parts already work perfectly in the A2 and also got the jdd box

Paul


Sent from my iPhone using Tapatalk
Yes, I changed the part that the cables connect to over to the jdd from the old box and used the original connectors. The part on the jdd was kind of seized and plastic so best replaced. The weight on my jdd didn't want to come off so rather than used lots of force I just cut it down, seemed to work fine if anyone else has the same problem when fitting the jdd.
 
Back
Top