heated mirrors fitting is easy!
hello all, bought the heated mirrors, took all advice, removed the bottom cover of the mirror surround with the torx bit, and electrically moved the mirror so I could put my fingers around the right edge of the glass as you look at the mirror, which was easier than I thought having big hands.
I then used a jewellers flat ended screwdriver, very small useful tools, and from where I had taken the bottom cover of the mirror off, i put the screwdriver in prising very gently between the small round lug and the back of the mirror, whilst with my left hand I had my fingers round the right edge of the glass gently pulling on the mirror. As I could see the area where I had put the screwdriver had parted slightly, I took the screwdriver out and moved it to another area (towards the car) between the mirror and the lugs holding it on. Applied the same gentle pressure and the mirror popped off.
I took my time, didn't break the mirror and it was off in about 2 minutes.
Applied a little grease as the advice told me and attaching the leads (I almost forgot!!) I then positioned the mirror and pushing with a little heavier pressure felt it ease into place, with a bit of a grating sound.
Done. thanks all for info
glen