Ignition contacts replace

zago

Member
Hello,

Does anyone can share his experience of changing this part:
31807750-F46D-4AA2-B0A6-B7EB80409840.jpeg


I saw here in forum an instruction but it is better to hear from one who done this. In instructions usually too simple than in real life.
Special tools? or any othe tricky things that could be missed?
 
Hi Zago,

If you have the tools and skills to remove the airbag, steering wheel and plastic trim panels in order to access this part, then you will definitely be able to change it.
It is held in place by a single screw (sometimes set in place with a colourful adhesive compound). Old switch out, new switch in. There’s nothing complicated about it.

All the best,

Tom
 
Didnt change anything. Looks like its common fault if the car not used for long period. Do “key training” and problem solved.
 
Back
Top