in need of help.

M

Marco77

Member
About 5 months ago i replaced my brake light switch for a brand new one. Just the other day the glow plug coil was flashing (tell tale sign i have no brake lights working) so check my brake lights and sure enough they are not working.

So i decide to hook up the vagcom to find out whats going on.

Wish i hadn't now as i have a big list of fault codes showing up now.

Can some please help me with these

Address 1

16955 - Brake switch (F) implausible signal
P0571 - 35-10 intermittent

17965 - Charge Pressure control : Positive Deviation
P1557 - 35 - 10 intermittent

Address 3

00526 Brake light switch (f)
008 implausible signal intermittent

01435 - Brake pressure sensor 1 (G201)
008 - implausible signal - intermittent

Address 08
controller
Note Excessive Comm errors

Address 17
01317 - Control module in instrument cluster (j285)
49-10 No Communication intermittent

00778 Steering Angle sensor (G85)
49-10 No communication intermittent

Address 46
Excessive comm errors
 
When i hold my brake pedal down after a few seconds the abs warning lights come on. Is this the brake pressure sensor??

Also i recently replaced my intercooler and thrust sensor as i had an air leak causing the car to go into limp mode. When the new intercooler and sensor were fitted the car ran like a dream until last week when it was returning to limp mode under heavy load.
Could this be the charge pressure sensor that needs replaced??
 
You must log in or register to reply here.
Back
Top