indicator problem

ElishaPrincess

New Member
Hello Audi Fam I need some help my left n right flashers indicator not working in my dashboard totally dead my hazard is working, I tried to search in other section I read the indicator relay mybe if some one help me to try first Changing the fuses? and what number and amp thanks
 
Yep relay. Unusually it is a combined indicator and hazard relay so one part can work fine but the other half failed. Have fun removing it from the dash!
 
Hello Audi Fam I need some help my left n right flashers indicator not working in my dashboard totally dead my hazard is working, I tried to search in other section I read the indicator relay mybe if some one help me to try first Changing the fuses? and what number and amp thanks
It’s a combined relay for both the hazards & indicators located in the centre console behind the
Storage box & ashtray
 
Morning,

Whilst your problem is no doubt relay related it is worth checking the fuses. The relay is provided power via to fuses:

IMG_8326.jpeg


The hazard warning function is powered by fuse #7 and the turn signal function of the relay is powered by fuse #34. As your hazard warning lights are reported as working just fine then it’s certainly worth checking fuse #34 with a multimeter or by simply replacing it with a new one.

If this doesn’t resolve your issue then as others have already suggested, it’s either the relay itself, a faulty stalk or a problems along the loom or at the connector.

You should be able to locate a relay on eBay.it though. Here’s one that’s available, not cheap but an option:


The part number you’re seeking is: 8Z0941509

Hope this helps.

Kind regards,

Tom
 
Goodmorning @2work Bro can you check if this fit I rather buy the new one instead of 2nd hand if they are the same

Hello there,

Yes the new item you suggest is exactly the part number for the replacement hazard relay. Did you check/change fuse #34.

Kind regards,

Tom
 
Yes Bro I changed it fuse n.34 nothing happens. or do I need also to change the bulb light that's why my indicator was not flashing on the dashboard? my Hazzard indicator is working, in other case bro you confirm that the relay that is send is the right one? @2kwork
 
Back
Top