Indicator relay modification for LED bulbs

Well at long last, and just before the mot, the problem was sorted, with help from Tom Cunningham, Timmus.
With standard relay and filament bulbs, the indicators worked but the hazard switch was disabled.... but flashed with right indicator only.
Turned out to be a blown 5A fuse!
Never even thought of fuses as I assumed things would not work, or work correctly.
Now mot' able!


Sent from my SM-N960F using Tapatalk
 
Could you please send an image of how to mod the rear lights, to get 2 side lights. The images I took seem to have disappeared from my phone!

Regards....Bob

Sent from my SM-N960F using Tapatalk
 
Jellybean said:
Yes, if it was you that modded the rear lamp holder to give 4 side lights?
Click to expand...

Ah. It wasn't that exactly then. I swapped the fog and brake positions with some cutting and rewiring. But you can achieve the same result by just swapping the wires in the connector. No need to ruin your lamp holders. I can take a new pic for you though.
 
Sorted. As you said, it was easier to swap the terminals in the connectors!

Sent from my SM-N960F using Tapatalk
 
Jellybean said:
Well at long last, and just before the mot, the problem was sorted, with help from Tom Cunningham, Timmus.
With standard relay and filament bulbs, the indicators worked but the hazard switch was disabled.... but flashed with right indicator only.
Turned out to be a blown 5A fuse!
Never even thought of fuses as I assumed things would not work, or work correctly.
Now mot' able!


Sent from my SM-N960F using Tapatalk
Click to expand...
Rob, which 5A fuse is it? I have exact same issue with mine!
 
You must log in or register to reply here.
Back
Top