jp.oog switchgear restoration service

jp.oog

Active Member
Hello members,
Why not treat your car interior to the same love and care as you do the exterior. I am pleased to offer a switch restoration service to members.
I use high quality one hit stencils to achieve a near factory hard touch finish. All switchgear and bezels are repainted and coated in satin lacquer designed for plastic surfaces.
Using refundable deposits, I can send you replacement switchgear for your A2. At this moment in time the exchange service is not available for any double DIN climates, double DIN heated seat climates or drivers 4 x electric window switch assemblies. In these instances I would need your units sending to me for restoration. If any units are sent to me for restoration no deposit is necessary.
Please note the final finish is satin black hard touch. This can appear darker than the original soft touch black finish. A full switch set takes approximately 10 days to complete dependant on current workload.
Hope you like the images attached.
James
 

Attachments

  • 20210319_174517.jpg
    20210319_174517.jpg
    328.4 KB · Views: 602
  • 20210320_092848.jpg
    20210320_092848.jpg
    936.4 KB · Views: 884
  • Screenshot_20231123-175109_Drive.jpg
    Screenshot_20231123-175109_Drive.jpg
    162.9 KB · Views: 115
  • Screenshot_20231123-175103_Drive.jpg
    Screenshot_20231123-175103_Drive.jpg
    185.7 KB · Views: 111
  • Screenshot_20231123-175123_Drive.jpg
    Screenshot_20231123-175123_Drive.jpg
    194.6 KB · Views: 101
  • Screenshot_20231123-175116_Drive.jpg
    Screenshot_20231123-175116_Drive.jpg
    176.4 KB · Views: 116
Last edited:
Wonderful, I think many members will make use of your service.

Headlight switch on its way to you tomorrow, please PM your address.

Andy

PS. You should have posted in 'Member Services' under 'Community', expect a kindly moderator will move it, it will remain more visible that way.
 
Hello members,
Why not treat your car interior to the same love and care as you do the exterior. I am pleased to offer a switch restoration service to members.
I use high quality one hit stencils to achieve a near factory hard touch finish. All switchgear and bezels are repainted and coated in satin lacquer designed for plastic surfaces.
Using refundable deposits, I can send you replacement switchgear for your A2. At this moment in time the exchange service is not available for any double DIN climates, double DIN heated seat climates or drivers 4 x electric window switch assemblies. In these instances I would need your units sending to me for restoration. If any units are sent to me for restoration no deposit is necessary.
Please note the final finish is satin black hard touch. This can appear darker than the original soft touch black finish. A full switch set takes approximately 10 days to complete dependant on current workload.
Hope you like the images attached.
James

This is an excellent service, how on earth do you restore the logos on the heated seat climate panel, as with the soft touch removed they loose their detail.


Sent from my iPhone using Tapatalk
 
Morning James,

This looks terrific and I was wandering when this would come to light as it was hinted at recently on another thread.

I’ll no doubt be along in due course for a refurnished DD Heated Seat Climate Panel, possible window switches also.

After watching this YouTube clip it looks like other stencils are available. Can I ask if you’re able to do the cup holder fascias with these superb stencils. If so then here is the next big ask, are you able to do this in Jive for us owners with a Twist interior. If not, are you able to put us onto the stencil supplier so we could do it ourselves with a colour match rattle can.

Kind regards,

Tom
 
Hello members,
Why not treat your car interior to the same love and care as you do the exterior. I am pleased to offer a switch restoration service to members.
I use high quality one hit stencils to achieve a near factory hard touch finish. All switchgear and bezels are repainted and coated in satin lacquer designed for plastic surfaces.
Using refundable deposits, I can send you replacement switchgear for your A2. At this moment in time the exchange service is not available for any double DIN climates, double DIN heated seat climates or drivers 4 x electric window switch assemblies. In these instances I would need your units sending to me for restoration. If any units are sent to me for restoration no deposit is necessary.
Please note the final finish is satin black hard touch. This can appear darker than the original soft touch black finish. A full switch set takes approximately 10 days to complete dependant on current workload.
Hope you like the images attached.
James

Really is a game changer


Sent from my iPhone using Tapatalk
 
Morning James,

This looks terrific and I was wandering when this would come to light as it was hinted at recently on another thread.

I’ll no doubt be along in due course for a refurnished DD Heated Seat Climate Panel, possible window switches also.

After watching this YouTube clip it looks like other stencils are available. Can I ask if you’re able to do the cup holder fascias with these superb stencils. If so then here is the next big ask, are you able to do this in Jive for us owners with a Twist interior. If not, are you able to put us onto the stencil supplier so we could do it ourselves with a colour match rattle can.

Kind regards,

Tom
Hi Tom,
Yes cupholders are possible. All soft touch is removed from the fascia and then its painted white. Stencil attached and then painted satin black. Stencil removed then satin lacquer top coat.
Any other colour than black would need to be matched.
The stencils are available to order from my friend Borislav Rumenov Petrov in Bulgaria.

Hope this helps

James
 
I can do you a regular supply of worn units for restoration so you can keep stock in James.
Hi Steve,
Thank you for your offer. I'm still working through the last batch you sent me.
The three limiting factors at the moment are:

Drivers double window switch bezels/switches.
Passenger side window switch bezels/switches.
Front foglamp headlight switches.

Though I am happy for members to send me their units for restoration without the need for a deposit.

James

James
 
Hi Tom,
Yes cupholders are possible. All soft touch is removed from the fascia and then its painted white. Stencil attached and then painted satin black. Stencil removed then satin lacquer top coat.
Any other colour than black would need to be matched.
The stencils are available to order from my friend Borislav Rumenov Petrov in Bulgaria.

Hope this helps

James
Thanks you for the response James,

I’ve been watching some of the YouTube clips by Borislav, amazing results and so happy that someone is finally offering this service.

Are you willing to offer the Jive colour match Sir as I’m really interested. I can send the cup holder fascias this morning if you like.

Another question if I may. Regards the headlight switch refurb, would you be able to add the ‘Auto’ icon for member with the auto headlight switch. This would save getting the Dremel out to add the supplied auto icon ring to a standard headlight switch fascia.

I can also sent you a headlight switch fascia this morning if this is possible as it would allow a better fitting as when the auto icon ring is fitted the headlight switch doesn’t sit as perfect as Audi intended.

Kind regards,

Tom
 
This is an excellent service, how on earth do you restore the logos on the heated seat climate panel, as with the soft touch removed they loose their detail.


Sent from my iPhone using Tapatalk
Hi,
All the bezels do indeed have their soft touch removed. There is a white section in the bezel for the logo to be lit. This area has a stencil attached before being painted satin black. It is very fiddly indeed.
James
 
Another question if I may. Regards the headlight switch refurb, would you be able to add the ‘Auto’ icon for member with the auto headlight switch. This would save getting the Dremel out to add the supplied auto icon ring to a standard headlight switch fascia.

I can also sent you a headlight switch fascia this morning if this is possible as it would allow a better fitting as when the auto icon ring is fitted the headlight switch doesn’t sit as perfect as Audi intended.

Kind regards,

Tom

Theres an ideaI’ve just been cutting a spare in readiness for my new auto switch!


Sent from the future
 
Thanks you for the response James,

I’ve been watching some of the YouTube clips by Borislav, amazing results and so happy that someone is finally offering this service.

Are you willing to offer the Jive colour match Sir as I’m really interested. I can send the cup holder fascias this morning if you like.

Another question if I may. Regards the headlight switch refurb, would you be able to add the ‘Auto’ icon for member with the auto headlight switch. This would save getting the Dremel out to add the supplied auto icon ring to a standard headlight switch fascia.

I can also sent you a headlight switch fascia this morning if this is possible as it would allow a better fitting as when the auto icon ring is fitted the headlight switch doesn’t sit as perfect as Audi intended.

Kind regards,

Tom
Hi Tom,
I started doing this for my new mpi last year as I couldn't believe the price of hard touch units or buttons etc, if you can find them.
Yes I can add the Auto logo to the original headlamp switch to replace what is there currently. Boris does make quite an extensive range of stencils for Audi/VWs old and new. He even makes them for Mercedes cars...what ever they are.
I would physically need the jive cupholder fascia in order to try and colour match it. Please be aware that the new finish would be hard touch satin.

James
 
Hi Tom,
I started doing this for my new mpi last year as I couldn't believe the price of hard touch units or buttons etc, if you can find them.
Yes I can add the Auto logo to the original headlamp switch to replace what is there currently. Boris does make quite an extensive range of stencils for Audi/VWs old and new. He even makes them for Mercedes cars...what ever they are.
I would physically need the jive cupholder fascia in order to try and colour match it. Please be aware that the new finish would be hard touch satin.

James
More than happy with what’s been said here James,

I’ll switch to PM to not clog up your service offering page.

Kind regards,

Tom
 
Hello members,
Why not treat your car interior to the same love and care as you do the exterior. I am pleased to offer a switch restoration service to members.
I use high quality one hit stencils to achieve a near factory hard touch finish. All switchgear and bezels are repainted and coated in satin lacquer designed for plastic surfaces.
Using refundable deposits, I can send you replacement switchgear for your A2. At this moment in time the exchange service is not available for any double DIN climates, double DIN heated seat climates or drivers 4 x electric window switch assemblies. In these instances I would need your units sending to me for restoration. If any units are sent to me for restoration no deposit is necessary.
Please note the final finish is satin black hard touch. This can appear darker than the original soft touch black finish. A full switch set takes approximately 10 days to complete dependant on current workload.
Hope you like the images attached.
James
Window switch bezel: do you soul black only or can you match the twist colour too? Many thanks
 
Back
Top