Little Dog
A2OC Donor
Costs, avoidable and necessary extra in my case:
3387. Pin wrench £12.17, for adjusting timing belt tension. The pulley can also be adjusted much more easily using an allen key. I fortunately have other applications for his tool.
Gear puller with thin jaws to get behind and pull the chain sprocket off the crankshaft £19.95. Not man enough for the job, a big ugly bearing puller is required. I had one, not expensive off eBay.
Long 5mm allen key to refit those sump screws behind the flywheel £1.89. To get them started without crossing threads the same with a ball end is required. I had one.
M7 helicoil kit was need in my case, £7.99 eBay.
That's it, chain done and fully reported. Now onto the challenge the little horror through at me yesterday!
3387. Pin wrench £12.17, for adjusting timing belt tension. The pulley can also be adjusted much more easily using an allen key. I fortunately have other applications for his tool.
Gear puller with thin jaws to get behind and pull the chain sprocket off the crankshaft £19.95. Not man enough for the job, a big ugly bearing puller is required. I had one, not expensive off eBay.
Long 5mm allen key to refit those sump screws behind the flywheel £1.89. To get them started without crossing threads the same with a ball end is required. I had one.
M7 helicoil kit was need in my case, £7.99 eBay.
That's it, chain done and fully reported. Now onto the challenge the little horror through at me yesterday!
Last edited: