OSS 'Open Sky System' Motor mount

I also fitted one to Andrew cars through the hole in the head lining where the light panel goes
Certainly doable with a angle head on the dremmal

How many more would you like ?
I over made a few and one or two members dropped out so I have some in stock

Paul


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: fhl
Quick question: my OSS used to open fully until I decided to upgrade to the 2-stage motor after when it started doing nothing for the first few seconds hence it now opens 80%. Would that still be open enough to proceed with the installation of the new mount or not? Thanks

PS. I already tried squeezing the two "rails" together but there was no play and no improvement.
 
I fit the machines oss with the oss fully shut


Sent from my iPhone using Tapatalk
Yes, you can do it with the roof shut, it just means you have to cut the old housing off rather than slide it along the bronze tubes.
Your roof needs attention if the motor turns without moving the glass panels.
 
Yes, you can do it with the roof shut, it just means you have to cut the old housing off rather than slide it along the bronze tubes.
Your roof needs attention if the motor turns without moving the glass panels.
Could you elaborate on this? My motor also run a good while before there is any glass movement.
 
This means that the cable as broken away from the truck
It then catches on the front door of the truck to close and the rear foot to open
This will NOT work for long before it fails totally
Either new cables are needed or the repair plates are needed to re connect the cable to the truck

All the best. Paul


Sent from my iPhone using Tapatalk
 
This means that the cable as broken away from the truck
It then catches on the front door of the truck to close and the rear foot to open
This will NOT work for long before it fails totally
Either new cables are needed or the repair plates are needed to re connect the cable to the truck

All the best. Paul


Sent from my iPhone using Tapatalk
Either way these parts are no longer available from Audi, so it’s a good job you have people on this forum who make parts to fix OSS ;)
 
for anyone else who wants to get in on these motor mounts, I'm nearly finished with the last batch which satisfies all of the initial interest shown by members. One or two members pulled out so there are a few motor mounts that are currently spare should anyone else want to get onboard at the initial £140 price.

Cheers,
Paul
How can I order one others mounts please
 
I over made a few when I did the initial batches so happy to sell you one at the batch price of £140 plus £5.00 delivery to anywhere in the uk

PayPal friends and family only to
[email protected]

Leave your name and address in the PayPal note and oss mount and I’ll get one in the post to you as soon as I have the above details

Cheers
Paul


Sent from my iPhone using Tapatalk
 
I over made a few when I did the initial batches so happy to sell you one at the batch price of £140 plus £5.00 delivery to anywhere in the uk

PayPal friends and family only to
[email protected]

Leave your name and address in the PayPal note and oss mount and I’ll get one in the post to you as soon as I have the above details

Cheers
Paul


Sent from my iPhone using Tapatalk
Done ??
 
Well you got my vote!
"Don't make what you can buy"
Many thanks to Paul, Ian and Adam for their skilled work.
All we need is some sunshine now!
IMG_20210523_162010_2_resize_78.jpg
 
Yes I have two left from the original batches made
I will still honour the price of £140 plus delivery which is normally £7

Drop me a pm if you want one

Paul


Sent from my iPhone using Tapatalk
 
Back
Top