Rear Bilstein B4s and Spidan Springs complete

Pras

A2OC Donor
Here are a few comparison pics of my install today:

Original side view:

original.jpg

New Side view:
newheight.jpg


Original height 25 inches:
25inch.jpg


New height 26 1/2:

26halfinch.jpg


New Suspension installed:
IMG_20180609_164133941_HDR.jpg


Spring comparison:
IMG_20180609_151715115.jpg


Old s**tty bits - you can play the accordion with the shocks
IMG_20180609_162331705.jpg



I'll probably let a garage do the fronts as I don't have spring compressors and have been told the drivers side is a pain...
took me 3 hours, some new scars and a lot of swearing but very enjoyable.

Quick test drive and it already feels better over bumpy bits!
 
Here are a few comparison pics of my install today:

Original side view:

View attachment 40374
New Side view:
View attachment 40375

Original height 25 inches:
View attachment 40376

New height 26 1/2:

View attachment 40377

New Suspension installed:
View attachment 40378

Spring comparison:
View attachment 40379

Old s**tty bits - you can play the accordion with the shocks
View attachment 40380


I'll probably let a garage do the fronts as I don't have spring compressors and have been told the drivers side is a pain...
took me 3 hours, some new scars and a lot of swearing but very enjoyable.

Quick test drive and it already feels better over bumpy bits!

Now this could be an easy way of me getting the extra ride height for the Dune/Allroad project.
 
Does anyone know the model number that gives an increased height on spidans? The front is high enough already, i just need to raise the rear. Thanks
 
Back
Top