Rear drivetrain mount / dog bone 8Z0199851K

[ecoangel]

Anyone know differences between the various Audi A2 rear engine/gearbox to subframe mounts?

After one for the A2 1.2 tdi - PN: 8Z0199851K

Are there alternatives from Skoda/VW etc?

Cheers

Lukas

 

[Vic]

Keep the bracket from your old one.

febi | 31113 | Engine Mounting | bilstein group partsfinder | Official Catalogue for febi, SWAG & Blue Print Spare Parts

febi 31113 Engine Mounting suitable for Seat, Škoda, Volkswagen (VW) Fitting Position: rear, lower

partsfinder.bilsteingroup.com

febi | 108779 | Engine Support | bilstein group partsfinder | Official Catalogue for febi, SWAG & Blue Print Spare Parts

febi 108779 Engine Support suitable for Seat, Škoda, Volkswagen (VW) Fitting Position: rear

partsfinder.bilsteingroup.com

 

[Ducky00]

Hi Vic. Thank you so much for the information! It was really helpful! I had found a cheap one not like in the Audi original parts! Best regards Zsolt

 

[Vic]

Hi Vic. Thank you so much for the information! It was really helpful! I had found a cheap one not like in the Audi original parts! Best regards Zsolt

This is for polo 1.4 TDI but i think it should be good also for audi 1.2 TDI. Rubber can be a little harder but not so mutch.
1.2 petrol version from polo can be too soft for TDI.

 

[Fredaudi]

Hi, when swapping the Polo/Febi bracket for the original one, I guess I need a torque setting for the bushing bolt.
50 nm for the 3 bracket bolts, and 40 nm+ 90° for the subframe bolt.
Anyone that knows? I can`t find it.

I replaced the org. engine support 8Z0 199 851 AA with Febi 31083, 6Q0 199 851 AA.

Febi 31113 covers suff. AQ and AG, and Febi 108779 cover AR.

​

 

[audifan]

Manual page here...

Audi Workshop Service and Repair Manuals > A2 > Power unit | 3-cylinder TDI unit injector engine (1.4 ltr. 2-valve), mechanics | Engine assy,cylinder block,crankcase | Assembly mountings | Removing and installing pendulum support

A2 > Audi Workshop Service and Repair Manuals > Power unit | 3-cylinder TDI unit injector engine (1.4 ltr. 2-valve), mechanics | Engine assy,cylinder block,crankcase | Assembly mountings | Removing and installing pendulum support

workshop-manuals.com