XRF
Member
After watching the excellent video from Mr.Broons I'm about to have a go at removing the front seats from my 1.6 FSi.
However I'm a wee bit concerned about the seat airbag connector and triggering the airbag.
Assuming the battery has been disconnected first is it OK just to unplug the connector or do I definitely need a bypass tool (VAS 5094)?
I have a OBDeleven pro so I should be able to reset any warning lights.
Any thoughts/advice much appreciated
However I'm a wee bit concerned about the seat airbag connector and triggering the airbag.
Assuming the battery has been disconnected first is it OK just to unplug the connector or do I definitely need a bypass tool (VAS 5094)?
I have a OBDeleven pro so I should be able to reset any warning lights.
Any thoughts/advice much appreciated