I wonder if anyone can offer some guidance. I have a leather steering wheel to replace the rather unpleasant plastic one. I have tried removing the two bolts holding the air on the 'new' wheel. However they won't come out. After I have unscrewed them, they keep making a clicking noise and can't be removed from the wheel. Has anybody got any theories as to why this is happening? Thanks.
Steering wheel removal
- Thread starter Veedub68
- Start date
Robthebank
Member
There is a how to on here somewhere I read it the other day, I’m pretty sure those screws are captive and shouldn’t come out, they loosen then you pull the airbag off. I will have another look now for the guide.
Thanks. didn't want to pull too hard.
Robthebank
Member
Steering Wheel Removal
Does anyone know the correct procedure for changing the four spoke airbag unit and steering wheel? I have some instructions from the TT forum but any help would be greatly appreciated.
www.a2oc.net
sciroccorrado
A2OC Donor
The bolts don't come out deliberately. The airbag should need a gentle pull to remove, but be careful to hold on to it as you don't want it falling into the footwell.