Super VAG K+Can 2.0 scanner

B

bigantg

Member
Hi Guys,

Having 3 Audi A2's within the family I decided to purchase a Super VAG K+Can 2.0 scanner from eBay, not a cheap model but seems suited for what I was after! Does anyone on here have one? Reason I ask is I'm having a few issues communicating with the cars!!! The scanner is reading the info about the car from the ECU such as chassis number etc, however, won't do much else!
One of our A2's has a faulty set of clocks so I have purchased a 2nd hand set from a breaker. I have installed them into the car however (to make things legal) I am attempting to adjust the mileage to that of the original odometer. My problems is that it cannot communicate with the clocks, only the ECU.

Any idea's?

Many thanks
Ant
 
Buy cheap, buy twice (at least). This is what you want for general scan work: http://www.gendan.co.uk/product_VCHU.html

As to coding clocks and mileage correction, leave it to a professional - the tools needed to do this are pricey and you could end up doing more harm than good if you don't know what you're doing (and by the sounds of it, you don't).

Get a genuine VCDS interface, get lifetime software updates and technical support from the writers of the software directly.
 
You must log in or register to reply here.
Back
Top