MorningAny advice ...seems ns wheel arch bolt thread is gone and given this is needed how do I repair the thread in the chassis leg?
Morning
Had the same on mine , solutions are varied, but I choose to drill out the old bolt , and the chase the remaining bits of the bolt out with a m6 die / replaced the bolt with new M6 cap head , adding load of grease for next time ...
M6 may not be the right size , and more clue up folks around ?
M6 / 6mm Brass Thread Rubber Rivnuts - Rivet Nutserts Rubnuts - Insert Nuts | eBay
Rubber Rivet Nuts. These Rubber Nut Inserts are manufactured from Neoprene or E.P.D.M. Rubber and contain a brass nut insert/thread. They do not need a special tool to set (a screwdriver will work fine).www.ebay.co.uk
GWR fasteners I've had things from before; these were new to me. I've now got a set of 5 each of M5, M6 and M8 rubber nutserts to trial with various M5/6/8 stainless bolts I had from rowing gear as well as various car bolts. The thing I like about these is that you get another chance - I always find the metal ones a bit terrifying (if very useful) simply because if you get it wrong and shear them off you need to do even more drilling out.
Looking to try the m6 inserts you listed here but I'm guessing the thread on original oem bolts wont ne suitable? These inserts look to have a tighter thread?
Грязезащита или шумоизоляция двигателя. ( PR — 1SB )
PR коды: 1SA — Без защиты двигателя 1SB — Защита двигателя Поставлялись следующие типы защиты: ►Для авто с дизельными ДВС: 8Z0 825 235 8Z0 825 235 D 8Z0 825 235 F ►Для авто с бензиновыми ДВС: 8Z0 8…www.drive2.ru