audifan
A2OC Donor
I can't answer that wasn't there to see it. How did you bleed the brakes and how did the garage. If pressure bleeding must NEVER EXCEED 1 BAR pressure.
What has the garage said to you? It is possible that a faulty unit has been fitted. You have to be a bit more careful with the A2. As said I either use a good self bleed kt or at most vacuum the fluid through and not use pressure bleeders as difficult to make sure the pressure is not too high. Also the use of the block of wood to prevent the pedal going to the floor.
I have known several attempts to thoroughly bleed the brakes especially if a line was replaced or the incorrect bleeding sequence used. Also bet the garage never bled the clutch.
What has the garage said to you? It is possible that a faulty unit has been fitted. You have to be a bit more careful with the A2. As said I either use a good self bleed kt or at most vacuum the fluid through and not use pressure bleeders as difficult to make sure the pressure is not too high. Also the use of the block of wood to prevent the pedal going to the floor.
I have known several attempts to thoroughly bleed the brakes especially if a line was replaced or the incorrect bleeding sequence used. Also bet the garage never bled the clutch.