NOT EASILY SOLVED garage to make up Kunifer brake pipes

[Little Dog]

View attachment 119579
The one on the left is not great as the pipe has too tight a turn which may have restricted the flow.
I can always have another go to perfect it.

That bend is very tight from the factory. Impossible to get by hand or using the bending tool we both have.
I created it by mounting a suitable sized socket on a rough extension gripped in a vice. I then wrapped the pipe around the socket with the aid of a nylon hammer.
I’ve made up a few, quite tricky to get that right. If you have something that works leaving well alone may be the best option.