G
Guest 4123
Guest
There were no error codes given (no VCDS presumably), so we had to work out what was at fault.
RAB
RAB
It seems that you have VCDS but you haven't posted the results of any scan. That might help!Hi guys!
g263 reads almost the same as fresh air temperature but I actually have a spare sensor so I can switch to see if that solves the problem. Haven't had too much time since last post though. Will do it when I have some time. Running econ mode in the meantime and not having any problems.
Completed the HVAC label file. I had to add .txt to be able to upload it here. Remove .txt and put it in VCDS\LABELS\USER folder and try it if you want. I haven't sent it to Rosstech yet. Feedback is much appreciated so it may be corrected before sending it in.
cheers!
I think so, yes. I think the (N280) is designed to never completely close (< 2%), to prevent compressor damage under any failure conditions.Thanks Mac! So you think the disconnected valve would still allow some refrigerant flow?
Reconnected the valve. Everything works great. How this would relate to my initial problem of diminished HVAC air throughput I have no idea whatsoever.