Been quite a while( 5 months) since I used the car and all the flaps and controllers seem to have frozen in the last used position.
Is there a way of nudging them free?
It's a reminder that amongst routine maintenance to-do list a low-high-low temp and flaps position cycle, performed on regular basis, should prevent this from happening.
Yes I do and have tried 001. Seems stuck on 254 With no movement showing. Have tried functioning all the air output controls but they are all full on all the time so the 254 would seem to correct.
The manual cycling may work, alternating from lo to high and selecting the various output directions one at a time. Have you tried the output tests in VCDS. Also run the tests with the engine running in case battery voltage is too low.
Once you have some movement use VCDS 001 again.