Jellybean
A2OC Donor
Why not? They work fine if you use the correct led bulbs.Do not fit led brake light bulbs to an A2 PERIOD.
Sent from my SM-N960F using Tapatalk
Why not? They work fine if you use the correct led bulbs.Do not fit led brake light bulbs to an A2 PERIOD.
Why not? They work fine if you use the correct led bulbs.Do not fit led brake light bulbs to an A2 PERIOD.
What are the correct ones ??Why not? They work fine if you use the correct led bulbs.
Sent from my SM-N960F using Tapatalk
Paolo, it depends which dis screen between speedo and tacho you have.What are the correct ones ??
I have basic tacho without bulb failure warning. But if I install the led bulb for brake/rear lights then I have EPC lighted on tacho. If I remove the led and reinstall the traditional bulbs after few mins EPC goes out.Paolo, it depends which dis screen between speedo and tacho you have.
If its a basic unit with no failed bulb warning, you can fit pretty much any led bulbs.
If you have a dis with failure warning, this function will need a lead inserting to negate this function.
Tom Cunningham, Timmus converted mine for me.
If you want leds in the indicators then a modified flasher unit is required.
Sent from my SM-N960F using Tapatalk
Just FYI.Basically canbus led bulbs ( like the one I have tried ) just have built-in resistor. I might try to buy another couple of canbus led bulbs
And use a high power resistor. At least 2X the actual power (I squared X R) dissapated. They will dissapte the heat more easily.so it would be better to take normal led and calculate the absortion different in watt and consequently the right resistor ?