Pins:
2 red/white +ve feed from fuse 2
3 brown -ve feed
9 white rear left line in signal (from pin 1 on head unit)
4 brown/white line in ground (from pin 3 on head unit)
10 yellow rear right line in signal (from pin 2 on head unit)
5 red/blue power on signal (from pin 6 on head unit)
7 red/green left speaker +ve
1 brown/black left speaker -ve
6 blue/black right speaker +ve
12 brown/white right speaker -ve
Having got the following info from another thread for the amp wiring, I was wondering that as I have an aftermarket Sony HU fitted if I was to run wires direct from the HU to the speaker out cables for the rear doors on the amp would this work using the rear outputs from the stereo totally bypassing the amp. So this would then be powering all the speakers without having to use the amp.
All help and advice appreciated.
2 red/white +ve feed from fuse 2
3 brown -ve feed
9 white rear left line in signal (from pin 1 on head unit)
4 brown/white line in ground (from pin 3 on head unit)
10 yellow rear right line in signal (from pin 2 on head unit)
5 red/blue power on signal (from pin 6 on head unit)
7 red/green left speaker +ve
1 brown/black left speaker -ve
6 blue/black right speaker +ve
12 brown/white right speaker -ve
Having got the following info from another thread for the amp wiring, I was wondering that as I have an aftermarket Sony HU fitted if I was to run wires direct from the HU to the speaker out cables for the rear doors on the amp would this work using the rear outputs from the stereo totally bypassing the amp. So this would then be powering all the speakers without having to use the amp.
All help and advice appreciated.