Tsu
Member
Ok, it's a clickbaity title. Apologies.
I've got an MOT looming large tomorrow morning and as Sod's Law would dictate the front passenger electric window decided to stop working yesterday, from either drivers or passenger switch.
I've been through almost every post on here related to the issue and none of the suggested fixes have sorted it.
- battery disconnect
- charged battery overnight
- relevant fuses checked
- swappingCCU DCM
- bangingCCU DCM
- checking loom
- reconnecting wiring in order power first with ignition on
Now the only minor success I had was once I swapped out the CCU and used the key in the drivers door held to the 9 o'clock position for a few seconds to open all the windows the passenger window behaved as it should and dropped. Trying to return both windows to the up position failed on the passenger side however.
For the sake of my sanity I disconnected the battery again and let the system clear for over 10 minutes. Reconnected and now both windows don't respond to the key, however the drivers side window still works from the switch.
On the off-chance that I've missed something I'd appreciate any dig outs you could give me here as I'm running out of time.
Thanks.
I've got an MOT looming large tomorrow morning and as Sod's Law would dictate the front passenger electric window decided to stop working yesterday, from either drivers or passenger switch.
I've been through almost every post on here related to the issue and none of the suggested fixes have sorted it.
- battery disconnect
- charged battery overnight
- relevant fuses checked
- swapping
- banging
- checking loom
- reconnecting wiring in order power first with ignition on
Now the only minor success I had was once I swapped out the CCU and used the key in the drivers door held to the 9 o'clock position for a few seconds to open all the windows the passenger window behaved as it should and dropped. Trying to return both windows to the up position failed on the passenger side however.
For the sake of my sanity I disconnected the battery again and let the system clear for over 10 minutes. Reconnected and now both windows don't respond to the key, however the drivers side window still works from the switch.
On the off-chance that I've missed something I'd appreciate any dig outs you could give me here as I'm running out of time.
Thanks.
Last edited: