Morning,
Are you able to add a picture of what you’re after as there are a few options for the Flat Bottomed Steering Wheel.
Here’s an example of a customised Sport Steering Wheel:
Factory versions of these do exist but can be difficult to find. There are eBay sellers who offer a service to customise you round Sport Steering Wheel to look like the image above.
What most members seem to do is go for a Flat Bottomed Multifunction Steering Wheel where there are a few variations available.
Here is what used to be retrofitted before Audi released the more recent style. It’s mainly from the TT and the S3 8P possibly more as I’m no expert on this:
The more common (recent) type you will have seen fitted into A2’s will have come from iterations like the A3, A5 and RS versions etcetera like the below picture:
There are other newer options available but they have their own compatibility issue to overcome.
To be honest most steering wheels will fit, it’s the airbag compatibility where things can be difficult to comprehend and you will stray into unknown territory. Also as the A2 was never available with this style of MFSW then there is no such ‘off the shelf’ airbag harness/loom to use and therefore some soldering may well be in involved, certainly not for the faint hearted as playing with airbags can be very dangerous and the adaption/modification of these safety critical items will not be discussed on the Clubs pages.
Most members who have an upgraded Steering Wheel would have had it retrofitted by someone like Tom
@timmus or
Hazzydayz and may not know there actual part number of what they have fitted. Also they will probably not know the corresponding airbag part number along with how it’s integrated into the Slip Ring. For this reason, not everyone will be able to assist with part numbers but if you dedicate a few hours online research you should end up in a position to answer your own questions. Answers are out there so don't give up.
Kind regards,
Tom