I'm at a loss to finding the correct springs for the correct ride height.
Last year fitted new front suspension with Bilstein front springs, Never checked the colour dots on the old ones.
Any way kept looking at the car and decided front was higher than normal.
Measured with a tape from wheel centres and front was higher.
Cannot take any measurements at the moment due to engine and gearbox not in.
Part number for Bilstein 37-160962 which are being removed.
Build code LO1
TPS had a job but say it should have 2 Red 3 Blue dots so that's 6Q0 411 105 AC.
Ebay seller says its Sachs 993180
7ZAP say 997842/843 Spidan 56631/32.
If anyone can make head nor tail of this then please let me know.
Car is 90bhp Sport without sunroof.
Hopefully someone else won't make the same basic mistake as me.
Last year fitted new front suspension with Bilstein front springs, Never checked the colour dots on the old ones.
Any way kept looking at the car and decided front was higher than normal.
Measured with a tape from wheel centres and front was higher.
Cannot take any measurements at the moment due to engine and gearbox not in.
Part number for Bilstein 37-160962 which are being removed.
Build code LO1
TPS had a job but say it should have 2 Red 3 Blue dots so that's 6Q0 411 105 AC.
Ebay seller says its Sachs 993180
7ZAP say 997842/843 Spidan 56631/32.
If anyone can make head nor tail of this then please let me know.
Car is 90bhp Sport without sunroof.
Hopefully someone else won't make the same basic mistake as me.