Brilliant thank you ?@Vic
This cropped up a while back, are we looking at the pipe from the scuttle on the driver's side? I measured the diameter of the spigot with a digital vernier and it is spot on 26mm. The 25mm corrugated black plastic pipe found in most large DIY/garden centres intended for use with garden water butts is nearly ideal and cheap. If you soak in it in hot water it will go on. Originally there was a oem clip, but a stainless jubilee clip will suffice.
Andy
@Vic
This cropped up a while back, are we looking at the pipe from the scuttle on the driver's side? I measured the diameter of the spigot with a digital vernier and it is spot on 26mm. The 25mm corrugated black plastic pipe found in most large DIY/garden centres intended for use with garden water butts is nearly ideal and cheap. If you soak in it in hot water it will go on. Originally there was a oem clip, but a stainless jubilee clip will suffice.
Andy
I think you are referring to one of the bonnet drains, Vic I think is after a scuttle drain pipe. My post refers to the scuttle drain not the bonnet drain, I have never had cause to measure that.Brilliant thank you ?
Yes, that's the one I was referencing. - Andy
See post 9! -AndyI think you are referring to one of the bonnet drains, Vic I think is after a scuttle drain pipe. My post refers to the scuttle drain not the bonnet drain, I have never had cause to measure that.
Welcome by the way, I must be quite near you (Eynsham) if you ever need a VCDS scan.
Andy
Appreciate the offer Andy thank you, we are the other side of Burford near Moreton in MarshI think you are referring to one of the bonnet drains, Vic I think is after a scuttle drain pipe. My post refers to the scuttle drain not the bonnet drain, I have never had cause to measure that.
Welcome by the way, I must be quite near you (Eynsham) if you ever need a VCDS scan.
Andy