depronman
A2OC Donor
To all who are interested in the infills.
Fitting instructions
The fitting is as described by Tom earlier in this thread in post 4
The foot rest will arrive from Tom with the 3M tape applied (ASSUMING YOU ASKED FOR THE TAPE)
Place the foot rest on a flat surface, tape down
trial fit the infills but DO NOT push them down onto the tape
If the infill is for any reason tight it can be easily sanded on the sides to remove the high spot
using some thin super glue (tool station sell it very cheaply) and a cocktail stick apply the super glue to the inside of the slot
Push that infill into place onto the tape
Repeat for the remaining 11 infills
Allow to dry for a few hours before fitting to your A2
Top tip, lightly sand and then clean the plastic foot rest in the car before sticking the foot rest into place. Try to leave the footrest without using it for 24 hours to allow the 3M tape to fully cure, as it only gains full strength over 24 hours
Ordering Infills
In line with Tom, the cut off date for ordering infills and having them delivered to Tom is the 6th Oct, after thr 6th Oct you can still order infills but they will be delivered to you directly and hence will incure the postage cost of £1 for a single set or £1.50 to two sets
I will get them printed as quickly as possible, but at around 20 mins per set its going to take a few nights to run of what is ordered so far. In order to not hold up Tom posting out the foot rests I will send the batch of infills to Tom first, and then work through everyone elses orders in the running order that they have arrived in paypal
Lastly, I am not spending time cross referencing paypal to A2OC threads to establish postal details, so if you are having your infills delivered to your home address and have not included your name and address in the paypal note then please put through a further paypal for £0.01 with you name and address in the paypal note.
ATB Paul
Fitting instructions
The fitting is as described by Tom earlier in this thread in post 4
The foot rest will arrive from Tom with the 3M tape applied (ASSUMING YOU ASKED FOR THE TAPE)
Place the foot rest on a flat surface, tape down
trial fit the infills but DO NOT push them down onto the tape
If the infill is for any reason tight it can be easily sanded on the sides to remove the high spot
using some thin super glue (tool station sell it very cheaply) and a cocktail stick apply the super glue to the inside of the slot
Push that infill into place onto the tape
Repeat for the remaining 11 infills
Allow to dry for a few hours before fitting to your A2
Top tip, lightly sand and then clean the plastic foot rest in the car before sticking the foot rest into place. Try to leave the footrest without using it for 24 hours to allow the 3M tape to fully cure, as it only gains full strength over 24 hours
Ordering Infills
In line with Tom, the cut off date for ordering infills and having them delivered to Tom is the 6th Oct, after thr 6th Oct you can still order infills but they will be delivered to you directly and hence will incure the postage cost of £1 for a single set or £1.50 to two sets
I will get them printed as quickly as possible, but at around 20 mins per set its going to take a few nights to run of what is ordered so far. In order to not hold up Tom posting out the foot rests I will send the batch of infills to Tom first, and then work through everyone elses orders in the running order that they have arrived in paypal
Lastly, I am not spending time cross referencing paypal to A2OC threads to establish postal details, so if you are having your infills delivered to your home address and have not included your name and address in the paypal note then please put through a further paypal for £0.01 with you name and address in the paypal note.
ATB Paul