Hello guys, I require a little help.
I fixed the cluster from my A2 and tried to bench test it (full DIS, not half).
So on the blue connector, I pinned:
Pin 1, and 23 for +12v
Pin 24 for Ground
And on the green connector, I added a cable on Pin 28, which is the K-line as I can see.
But I still cannot read it, so I cannot set the needles correctly without my car. What am I missing? Can anybody give me some advice? Thanks.
I fixed the cluster from my A2 and tried to bench test it (full DIS, not half).
So on the blue connector, I pinned:
Pin 1, and 23 for +12v
Pin 24 for Ground
And on the green connector, I added a cable on Pin 28, which is the K-line as I can see.
But I still cannot read it, so I cannot set the needles correctly without my car. What am I missing? Can anybody give me some advice? Thanks.