Edwrai
Member
Evening Edward,
Thank you so much for the information, I guess this CAN adapter would possibly also work with the ColorMFA. I may have to do a bit more research on this item.
This is exactly what I'm doing with the ColorMFA in Project OEM. I've got a 4F0910283B PDC control module which supports the 4 rear sensors with visualisation (OPS) support. It's already fitted but not working perfectly yet as I need to understand the pinout to add a LED which would be along the same wire as the OPS Off Button which is found in later Audi's. Without the OPS Off Button (or the just LED for resistance) I get a fault which won't clear and as such the OPS display in DIS just won't work, frustrating. I'm so close to completing this but when I thought I had time to play I ended up purchasing the PDK A2, this progressed into the other driver here taking on the OEM A2. I've not been able to tinker with the OPS display in DIS since then.
I'll get there though. Still interested in seeing the 3DColorMFD in action at some point.
Kind regards,
Tom
The 4F0910283B is a 8 sensor model? These models are natively supported with colormfd without the CAN converter
Sent from my iPhone using Tapatalk