depronman
A2OC Donor
Arm Rest Bracket BATCH TWO
===================
As batch one draws to a conclusion, the last few will be leaving early next week after a new tin of plasti dip arrives (Friday according to Mr Amazon) so fingers X
There are still a number of people on the reserve list that will clearly be disapointed, as such a 'batch two' may be a realistic possability in the near future.
I'm also advising that the price of the bracket for batch 2 will be £35 welded & painted including the fastners, a noticeable increase but I seriously underestimated the work and time involved in the bracket manufacture - my bad and I took it on the chin for batch one, but cannot do so for any further batches.
The minium order for the metal cutting is 27 sets worth. I don't expect all 27 sets to be sold any time soon and I don't mind holding some of the cut metalwork in stock, but I would need at least 10 brackets to be confirmed and paid for before I order the second set of metalwork.
There are currently in the region of 11 brackets on the reserve list that will not be satisfied from the batch one allocation, so if all members who expressed an interest are indeed still interested then I have the basis for being able to order the batch two set of metalwork.
The plastics for batch two will be the same price and offering as batch one i.e. £35 for a set of plastics Ex 3D printer or £55 for the plastics fully finished in plasti dip matt black (AKA Soul black)
Delivery will also be the same at £7 for either the 'bracket' or 'bracket and plastics' signed for insured delivery service
I am about to start a fairly major DIY project and as such will not be able to allocate much if any time to the arm rest project over the next month to six weeks, but if members are happy to pay for the brackets up front I will get the order in to cut-tec and will then be in a position to weld the odd one up as and when I get time.
The reseve list as it stands at the moment is -
*** @jaffa_jim you may well get the last one from batch 1, but there will only be the one
Can you please reply to this thread if you are one of the reserve list members and advise if you are still interested or not interested, also anyone else not on the reserve list who wold like to be in batch two then also come forward on this thread
I expect a flurry of photos over the next few weeks as members get thier brackets and if ordered thier plastics in either ex printer or fully finished forms and get the arm rest fitted to A2's, this is likely to peek further interest, so at the moments batch two is very much and watch and wait to see what the interest is
Cheers,
Paul
===================
As batch one draws to a conclusion, the last few will be leaving early next week after a new tin of plasti dip arrives (Friday according to Mr Amazon) so fingers X
There are still a number of people on the reserve list that will clearly be disapointed, as such a 'batch two' may be a realistic possability in the near future.
I'm also advising that the price of the bracket for batch 2 will be £35 welded & painted including the fastners, a noticeable increase but I seriously underestimated the work and time involved in the bracket manufacture - my bad and I took it on the chin for batch one, but cannot do so for any further batches.
The minium order for the metal cutting is 27 sets worth. I don't expect all 27 sets to be sold any time soon and I don't mind holding some of the cut metalwork in stock, but I would need at least 10 brackets to be confirmed and paid for before I order the second set of metalwork.
There are currently in the region of 11 brackets on the reserve list that will not be satisfied from the batch one allocation, so if all members who expressed an interest are indeed still interested then I have the basis for being able to order the batch two set of metalwork.
The plastics for batch two will be the same price and offering as batch one i.e. £35 for a set of plastics Ex 3D printer or £55 for the plastics fully finished in plasti dip matt black (AKA Soul black)
Delivery will also be the same at £7 for either the 'bracket' or 'bracket and plastics' signed for insured delivery service
I am about to start a fairly major DIY project and as such will not be able to allocate much if any time to the arm rest project over the next month to six weeks, but if members are happy to pay for the brackets up front I will get the order in to cut-tec and will then be in a position to weld the odd one up as and when I get time.
The reseve list as it stands at the moment is -
@jaffa_jim | 2 *** | 23-Jun-21 |
@NSM | 1 | 23-Jun-21 |
@Rusty911 | 1 | 24-Jun-21 |
@nod | 2 | 26-Jun-21 |
@Brennybear | 1 | 15-Aug-21 |
@Thedudeabides | 1 | 16-Aug-21 |
@MikeMiles | 1 | 24-Aug-21 |
@Virginiacg | 2 | 24-Aug-21 |
@mapping | 1 | 08-Sep-21 |
*** @jaffa_jim you may well get the last one from batch 1, but there will only be the one
Can you please reply to this thread if you are one of the reserve list members and advise if you are still interested or not interested, also anyone else not on the reserve list who wold like to be in batch two then also come forward on this thread
I expect a flurry of photos over the next few weeks as members get thier brackets and if ordered thier plastics in either ex printer or fully finished forms and get the arm rest fitted to A2's, this is likely to peek further interest, so at the moments batch two is very much and watch and wait to see what the interest is
Cheers,
Paul